Symbol MK2200 MicroKiosk, Product Reference Manual

Page: 36 / 278

2 - 8 MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Wired Ethernet: Power through POE
The POE installation option allows the MK2200 to communicate and receive power on the same 10/100Base-T
Ethernet cable. See
Figure 2-6 on page 2-9 and Figure 2-7 on page 2-10 .
1.
Connect the Ethernet cable to the MK2200 Ethernet / Bias-T port. See Figure 1-3 on page 1-5 .
2.
Ensure the Ethernet cable is terminated according to Table 2-2 on page 2-15 .
3.
Plug the other end of the Ethernet cable into the Bias-T (POE) module.
4.
Connect a patch cable from the Bias-T (POE) module to the host system LAN port.
5.
Connect the DC power supply to the Bias-T module.
CAUTION Do not use POE in conjunction with an external power supply connected to the power port on the
MK2200. Using two power sources can damage the MK2200 and/or the network.