Symbol MK2000 MicroKiosk, Product Reference Manual

Page: 59 / 194

3-7
Setup and Configuration
Reset Function
If an application is running, perform the Reset function and enter the Windows
®
CE
protected mode to access the Control Panel settings.
1. To perform a cold boot press and hold buttons B and C until the display goes blank
(typically 15 seconds) then release buttons (see Figure 1-1 on page 1-3). The
MK2000 reboots.
2. To prevent the MK2000 from entering an application, simultaneously hold down
buttons A and D just after the blue Performing System Initialization (Phase 1)
screen appears. The A and D buttons must be held down before the message
changes to Phase 2.
3. When the Enter Password prompt appears, enter DDBAC and touch OK on the
screen, or simultaneously press the A and B buttons for Enter.
4. The MK2000 enters Protected Mode and the Win CE desktop appears.
Control Panel Settings
Settings include the following:
• Backlight Settings
• Button Definitions
• Date and Time
• Inactivity Manager
• Gatekeeper
• Volume and Sounds
• Stylus Settings.
To access the Control Panel Settings:
1. Select Start
2. Select Control Panel from the Settings window
3. Select the item from the Control Panel window
4. Enter the desired settings.