Symbol MiniScan MS1204FZY, Integration Manual

Page: 181 / 260

Parameter Menus 10 - 75
MSI Plessey Check Digits
Parameter # 32h
These check digits at the end of the bar code verify the integrity of the data. At least one check digit is required.
Check digits are not automatically transmitted with the data.
*One MSI Plessey Check Digit
00h)
If two check digits is selected, also select an MSI Plessey Check Digit Algorithm on page 10-76 .
Two MSI Plessey Check Digit
(01h)
Transmit MSI Plessey Check Digit
Parameter # 2Eh
Scan this symbol to transmit the check digit with the data.
Transmit MSI Plessey Check Digit
(Enable)
(01h)
Scan this symbol to transmit data without the check digit.
*Do Not Transmit MSI Plessey Check Digit
(Disable)
(00h)