Symbol MiniScan MS XX07 Series, Integration Manual

Page: 128 / 406

10-20
MS XX07 Series Integration Guide
Programmable Raster Height and Raster Expansion Speed
Parameter # E4h, E5h
Note: These options are supported by the MS 2207, MS 2207VHD, and
MS 3207 only.
This parameter selects the laser pattern’s height and rate of expansion, and is only used
when Programmable Raster or Always Raster is enabled. This parameter is intended for
very specific applications, and is usually not necessary.
To select the laser pattern’s height and/or rate of expansion:
1. Scan the bar code for either Raster Height or Raster Expansion Speed below.
2. Scan two numeric bar codes beginning on page 10-132 that represent a two-digit
value. Valid values are between 01 and 15.
To change the selection or to cancel an incorrect entry, scan the Cancel bar code on page
10-134 .
Raster Height (Default 15)
Raster Expansion Speed (Default 11)