Symbol MiniScan MS XX07 Series, Integration Manual

Page: 125 / 406

10-17
Parameter Menus
Trigger Mode
Parameter # 8Ah
• Level - A trigger pull activates the laser and decode processing. The laser remains
on and decode processing continues until a trigger release, a valid decode, or the
Laser On Time-out is reached.
• Pulse - A trigger pull activates the laser and decode processing. The laser remains
on and decode processing continues until a valid decode or the Laser On Time-out
is reached.
• Continuous - The laser is always on and decoding.
• Blink - This trigger mode is used for triggerless ScanStand operation. Scanning
range is reduced in this mode. This mode is only supported by MS 1207FZY
models.
• Host - A host command issues the triggering signal. The scanner interprets an
actual trigger pull as a Level triggering option.
Level
(00h)
Pulse
(02h)
*Continuous
(04h)
Host
(08h)
Blink
(07h)