Symbol MiniScan MS-804FZY, Integration Manual

Page: 35 / 184

2-13
Installation
Figure 2-9. Symbol Perpendicular To Conveyor Movement
Symbol is Parallel to Conveyor Movement
With the symbol bars parallel to the conveyor belt direction (Ladder presentation) the
relationship is:
V = (R x H) / N
where:
V = Velocity of the conveyor (inches/second)
R = Scan Rate (see technical specifications)
H = Symbol height
N = Number of scans over symbol (minimum of 10 scans)
Scan Beam
Direction of Con
veyor P
erpendicular to Symbol
W=Symbol Width
F=Field Width