manualshive.com logo in svg

Symbol LT 1804, Product Reference Manual

Share
Download
Symbol LT 1804 Product Reference Manual Download Page 33

4-8

LT 1804 Product Reference Guide: Programming the LT 1804

Scan and Store affects Code 39 decodes only. If you select scan and store, it is 
recommended that you configure the scanner to decode Code 39 symbology 
only.

Baud Rate

Baud rate is the number of bits of data transmitted per second. The unit's baud 
rate setting should match the data rate setting of the host device. If not, data 
may not reach the host device or may reach it in distorted form.

Parity

A parity check bit is the most significant bit of each ASCII coded character. If 
you select ODD parity, the parity bit will have a value 0 or 1, based on data, to 
ensure that an odd number of 1 bits are contained in the coded character.

If you select EVEN parity, the parity bit will have a value, 0 or 1, to ensure that 
an even number of 1 bits are contained in the coded character. Select MARK 
parity and the parity bit will always be 1. Select SPACE parity and the parity 
bit will always be 0. Select the parity type according to host device 
requirements.

Hardware Handshaking

Hardware handshaking allows you to check the readiness of the receiving 
device before data is transmitted. If the receiving device is periodically 
occupied with other tasks, hardware handshaking is needed to prevent loss of 
transmitted data.

Select whether the scan data is to be transmitted as soon as it is available or 
whether transmission follows the RTS/CTS procedure. See 

Communication 

Protocols on page 4-21

 for more details.

Software Handshaking

This parameter offers control of the data transmission process in addition to, or 
instead of, that offered by hardware handshaking. These options may be 
combined, for example ACK/NAK with ENQ.

1. No Software Handshaking 

Summary of Contents for LT 1804


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands