Symbol LS4000P Series, Product Reference Manual

Page: 33 / 170

4-3
Maintenance & Specifications
Technical Specifications
Table 4-2. Technical Specifications
Item Description
Power Requirements*
PC Wedge/Synapse
RS-232C/Synapse
Low Power 4.5 to 5.5 VDC (max) 200 mA @ 5V typical
4.5 to 5.5 VDC (max) 190 mA @ 5V typical
4.5 to 5.5 VDC (max) 400 µA @ 5V typical
Decode Capability The LS 4000P can be programmed to decode the following
code types: UPC/EAN, Bookland EAN, Code 39, Code
39 Full ASCII, Trioptic Code 39, Code 93, Codabar,
Interleaved 2 of 5, Code 128, EAN 128, Discrete 2 of 5,
MSI Plessey, and PDF417. Set code length(s) for any linear
code type. The LS 4000P can auto-discriminate between all of
the above code types except for Code 39 and Code 39 Full
ASCII. Transmission of decoded information depends on the
capabilities of the attached terminal.
Beeper Operation User-selectable: Enabled, Disabled
Scan Repetition Rate 186 scans/sec (bidirectional)
Scan Angle ±37°
Roll (Skew) Tolerance ±45° from normal
Pitch ±60° from normal
Yaw ±30° from normal
1-D Decode Depth of Field See LS 4000P 1-D Decode Zone on page 4-5
2-D Decode Depth of Field See LS 4000P 2-D Decode Zone on page 4-6
Print Contrast Minimum MRD 25% absolute dark/light differential, measured at 650
nm.
*For direct host power connection, make sure the host terminal supplies sufficient power for the
specified operation. Symbol is not responsible for damage to host equipment or system mis-
operation due to an insufficient power condition.