Symbol LS 6000i, Product Reference Manual

Page: 154 / 205

Programming
5-113
Set Lengths for Interleaved 2 of 5
Lengths for I 2 of 5 may be set for any length, one or two
discrete lengths, or lengths within a specific range. The
length of a code refers to the number of characters (i.e.,
human readable characters) the code contains, and
includes check digits. Scan the appropriate bar code to
select one of the following options.
One Discrete Length
This option allows you to decode only those codes
containing a selected length. For example, if you select
I 2 of 5 One Discrete Length , then scan 1 , 4 , the only I
2 of 5 symbols decoded are those containing 14
characters. Numeric bar codes begin on page
5-138 . If
you make an error or wish to change your selection,
scan
CANCEL bar code on page 5-143 .
Two Discrete Lengths
This option allows you to decode only those codes
containing two selected lengths. For example, if you
select
I 2 of 5 Two Discrete Lengths , then scan 0 , 2 , 1 ,
I 2 of 5 - ONE DISCRETE LENGTH