Symbol LS 6000 Series, Product Reference Manual

Page: 35 / 175

LS 6000 Series Product Reference Guide
5-2
Defaults
The following table lists the defaults for all parameters. If you
wish to change any option, scan the appropriate bar code(s).
Table 5-1. Default Table
Parameter Default Page
Number
Set Default Parameter All Defaults 5-7
Host Type See page 5-8 5-8
Trigger Mode Triggered
Omnidirectional
5-16
Time to Return to Continuous
Omnidirectional 0.5 seconds 5-18
Beeper Volume High 5-19
Beeper Frequency High Frequency 5-21
Time-out Between Decodes, Same
Symbol Triggered: 200
msec; Constant-
On: 2 sec
5-23
Time-out Between Decodes,
Different Symbols 600 msec 5-24
Laser On Time 2.0 seconds 5-25
Rest Mode Timeout 30 minutes 5-26
Beep After Good Decode Enable 5-28
Linear Code Type Security Levels 2 5-29