Symbol LS 1006, Product Reference Manual, Page: 63 / 96

4-35
Programming the LS 1006
Codabar
Enable/Disable Codabar
Fixed Lengths for Codabar
Select one or two lengths for Codabar. If set both Lengths 1 and 2 to 0, the scanner can read
any length within 55 characters. If any default setting is in effect and is an appropriate length,
it need not be reset. Length 1 may range from 00-55, and Length 2 may range from 00-55.
Within Range for Codabar
This option allows you to decode a code type within a specified range. Set MIN Length and
MAX Lengths for Codabar. For example, to decode Codabar symbols containing between 4
and 12 characters, set MIN Length to 04 and MAX Length to 12. If you set both MIN Length
and MAX Length to 0, the scanner can read any length within 55 characters. We recommend
that you set the I 2 of 5 modulus 10 check to enabled when you set both Length 1 and 2 to
0. If any default setting is in effect and is an appropriate length, it need not be reset. Both
Length 1 and Length 2 may range from 00-55.
Enable Codabar Disable Codabar
Codabar Length 1
Codabar Length 2
Codabar MIN Length
Codabar MAX Length