Symbol Hotspot LS 2100, Product Reference Manual

Page: 42 / 350

4-1
Chapter 4
User Preferences
Introduction
You have the option to program the LS 2108 scanner to perform various functions, or
activate different features. This chapter describes each user preference feature and
provides the programming bar codes necessary for selecting these features for your LS
2108 scanner. For the undecoded LS 2100 scanner, refer to the programming guide for
your external interface controller or portable terminal. Before programming, follow the
instructions in
Chapter 1, Getting Started .
Your LS 2108 is shipped with the settings shown in the User Preferences Default Table on
page 4-3 (also see Appendix A, Standard Default Parameters for all host device and
miscellaneous scanner defaults). If the default values suit your requirements, programming
may not be necessary.
Features values are set by scanning single bar codes or short bar code sequences. The
settings are stored in non-volatile memory and are preserved even when the scanner is
powered down.