Symbol Hotspot LS 2100, Product Reference Manual

Page: 214 / 350

12-1
Chapter 12
Miscellaneous Scanner Options
Introduction
This chapter includes commonly used bar codes to customize how your data is transmitted
to your host device. In addition to these bar codes for data formatting, refer to each host
chapter for the appropriate host connections and host device features for your scanner.
Refer to
Chapter 11, Symbologies and Chapter 13, Advanced Data Formatting for
customizing data for transmission to your host device.
Before programming, follow the instructions in Chapter 1, Getting Started .
Note: To program the undecoded LS 2100 scanner, refer to the
programming guide for your external interface controller or portable
terminal.
Your scanner is shipped with the settings shown in the Miscellaneous Scanner Options
Default Table on page 12-3 (also see Appendix A, Standard Default Parameters for all host
device and miscellaneous scanner defaults). If the default values suit your requirements,
programming may not be necessary. Features values are set by scanning single bar codes
or short bar code sequences.