Symbol CRG 1100, Quick Reference, Page: 6 / 12

4
C R G 1 1 0 0
Charging a Battery Pack
1. Turn the power switch to ON. The power light illuminates.
2. Insert the battery pack in any slot of the charger.
3. The trickle charging (CHG/TRK) light illuminates for that slot
to indicate charging.
4. Charging completes after about 10 hours. The CHG/TRK
light blinks when the battery pack is fully charged.
5. Remove the battery pack from the charger.
Only slot 4 includes a discharge function. For more information,
refer to the PDT 1100 Product Reference Guide (p/n 70-35864-xx).
Battery Pack Maintenance Cycling
If the battery pack begins to have a reduced operating time between
charges, it may be due to “memory effect”. This effect can be
eliminated or reduced by doing battery pack maintenance cycling,
which fully discharges and then recharges the battery pack.
1. Ensure that the power switch on the charger is OFF.
2. Insert a battery pack into slot 4.
3. Turn the power switch ON.
35864036.eps
Battery pack