Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 770 / 861

769 Field descriptions
Cluster field descriptions
Cluster Member Properties—General tab
On the Cluster Member Properties General tab, you can set the member weight.
Associated tasks
The tasks that you can perform with this tab is:
■
“Changing global cluster configurations” on page 515
Cluster Member Properties—Description tab
Optionally, provides an extended description. This information is useful to help track changes or it can
be used as criteria for searches.
The maximum length is 20,000 alphanumeric characters.
VIPs window
You may need to add, modify, or delete a virtual IP address used in a cluster.
Associated tasks
The task that you can perform with this window is:
■
“Changing virtual IP addresses for clusters” on page 515
Table D-257 Cluster Member Properties
Field Description
Member ID Displays the cluster member ID.
This field is read-only.
Weight Weight is a number between 1 (least load) and 16 (most load).
Caption An optional, brief description of the cluster member settings.
The maximum length is 128 characters.
For longer descriptions, use the Description tab.
Table D-258 VIPs window
Field Description
Select interface for
VIP list Available interfaces to which you can apply a VIP.
VIP address VIPs that are currently associated with the selected interface. At least one VIP must be
associated with each interface; however, if there are more than two interfaces, and one is the
dedicated heartbeat interface, a VIP does not need to be assigned to the heartbeat interface.
You can assign up to 8 VIPs per interface, up to a maximum of 64 VIPs when there are 8
interfaces.