Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 664 / 861

663 Field descriptions
Assets field descriptions
VPN Security Entity Properties—Tunnel Endpoints tab
The Tunnel Endpoints tab lets you specify network entity and security gateway pairings or user
account and security gateway pairings, for use as endpoints in tunnels.
Note:
You must define the network entities, user accounts, and security gateway entities you intend to
use before you configure the VPN security entity.
Associated tasks
The task that you can perform with this tab is:
■
“Defining an entity and security gateway pair with a VPN security entity” on page 167
VPN Security Entity Properties—Description tab
Optionally, provides an extended description. This information is useful to help track changes or it can
be used as criteria for searches.
The maximum length is 20,000 alphanumeric characters.
Network Interfaces
The Network Interfaces tab lets you modify the parameters of the network interfaces for your security
gateway.
To configure new network interfaces or to modify a network interface IP address or netmask, you must
run the System Setup wizard.
Caption An optional brief description of the VPN security entity.
The maximum length is 128 characters.
For longer descriptions, use the Description tab.
Table D-112 VPN Security Entity Properties—Tunnel Endpoints tab
Field Description
Network entity Lets you select an existing network entity, user account, or user group.
Security gateway Lets you select an existing security gateway network entity.
Tunnel endpoint list Shows pairs of entities that you can use to define the endpoints of VPN tunnels.
To add a network entity/security gateway pair to the list, select them from the drop-
down lists, and then click Add.
To remove a network entity/security gateway pair from the list, select it and then click
Remove.
Table D-111
VPN Security Entity Properties—General tab (Continued)
Field Description