Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 550 / 861

549 Advanced system settings
Configuring advanced options
portcontrol.enable_udp_ports Specifies the UDP port to open.
There is no default value.
smtpd.loose_relay_check Loosens up syntax checking on recipient addresses. You have t set
this option to true to get smtpd.no_srcroutes to work.
The default value is false.
smtpd.loosen_RFC2554_syntax_check Relax protocol checking against RFC 2554.
The default value is false.
smtpd.max_body_line_length Increases the maximum line length for a message. The lower and
upper level limits for this variable are 64 bytes and 4096 bytes (4 K)
respectively. If a message exceeds the maximum line length, the
SMTP proxy drops the message and terminates the connection.
The default value is 1024.
smtpd.no_ip_hdr Allows an IP address in the header.
The default value is false.
smtpd.no_srcroutes Allow source routing.
The default value is false.
smtpd.passnonascii Pass non-ASCII characters.
The default value is false.
smtpd.rcpt_path_use_bracket Allows RCPT command to work without using the <> around
recipient names.
The default value is true
tcp-gsp.<service>.halfclose_timeout Half close timeout for a particular service handled by TCP GSP where
<service> is in the format of <port>/tcp For example, tcp-gsp.123/
tcp.halfclose_timeout.
tcp-gsp.<service>.nolinger Enable lingering for a particular service handled by TCP GSP. where
<service> is the port number. For example, tcp-gsp.123.nolinger
The default value is 0.
tcp-gsp.<service>.timeout Idle timeout for a particular service handled by TCP GSP where
<service> is in the format of <port>/tcp e.g. tcp-gsp.123/tcp.timeout.
ui.inactivity_timeout Defines the period of time, in minutes, that the SGMI remains open
during periods of inactivity.
The default value is 15.
ui.status_poll_interval Defines the SGMI polling interval in seconds.
The default value is 30.
UserPreferences.MaxReturnSet Determines the maximum number of results returned for each burst.
The default value is 500.
vultured.elapsedtime Period of time, in seconds, that the security gateway waits before
scanning for unauthorized processes.
The default value is 60.
vultured.users Security gateway users that are authorized to start processes.
The default list includes root, daemon, bin, mysql, www, pfsd,
ssyncd, sshd, and ldap.
Table A-1
Advanced options (Continued)
Option name Description