Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 30 / 861

30 Becoming familiar with the SGMI
Using the SGMI home page
■
If changes are waiting to be activated, who made them, and when
■
If licenses are nearing expiration, the expiration dates
This notification includes a link to launch the License Installation Wizard.
For connection status, in the left pane, click Monitors > Status.
For a graphical view of active connections, disk usage, and the physical state of your appliance, in the
left pane, click Monitors > Overall Health.
Related information
For further information related to this topic, see the following:
■
“Understanding and using licenses” on page 86
■
“Monitoring connections” on page 466
■
“Viewing system health” on page 462
Accessing commonly used configuration wizards
When you log on to the SGMI with write privileges, the Home page includes links to frequently used
configuration wizards, including:
If you are logged on with read-only access, the links to the wizards are not available.
Related information
For further information related to this topic, see the following:
■
“Using wizards to simplify configuration” on page 64
■
“Installing licenses” on page 94
■
“Configuring HTTP, FTP, and mail (SMTP and POP3) rules with the Firewall Rule Wizard” on
page 284
■
“Managing clientless VPN users” on page 411
■
“Using the Remote Access Tunnel Wizard to create Client VPN tunnels” on page 389
■
“Running the Gateway-to-Gateway Tunnel Wizard” on page 385
Firewall Rule Wizard Use this wizard to set up Web (HTTP), FTP, and Mail (SMTP and POP3) services if
you did not configure these services when you ran the System Setup Wizard
when first installing the appliance.
Client VPN Package Wizard Use this wizard to simplify the configuration of multiple Symantec Client VPN
computers. The wizard generates connection information for remote entities.
You provide these packages to remote users, who install them on computers that
are running Symantec Client VPN. The packages provide the information
necessary to connect to the security gateway.
Remote Access Tunnel Wizard Use this wizard to create local and remote endpoints and VPN policies for client
VPN tunnels and clientless VPN tunnels.
Gateway-to-Gateway Tunnel
Wizard Use this wizard to construct VPN tunnels that are IKE-enabled between two
security gateways. This wizard collects the information that is necessary to
identify the local and remote tunnel endpoints and the VPN policy that governs
the traffic within them.