Symantec NetBackup 5000, Routine Maintenance, Page: 29 / 53

BackupStore 5000
Routine Maintenance 4 Guide to the Routine Maintenance On the Management
Software
Issue 01 (2010-03-26) Symantec Corporation 4-3
Figure 4-2 Alarm list
Table 4-1 Description of alarm parameters
Parameter Description
ID The ID of an alarm, representing an alarm.
Time
The time when the alarm occurs. The format is
YYYY-MM-DDThh:mm:ss .
Type Alarms can be classified into the following types:
 Temperature
 Power Supply
 Cooling Device
 Physical Security
Source The device on which the alarm is generated.
Alert Information The abstract of the alarm information.
Table 4-2 Alarm information
Classification Type Device Description
Overtemperature of
the CPU core Temperature CPU Upper non-critical
going high
Overtemperature of
the air intake of the
chassis Temperature Air intake of the
chassis Upper non-critical
going high
PEM absence Power supply Power device Failure detected
Fan module absence Cooling device Fan Device absent
Chassis intrusion Physical security Chassis General chassis
intrusion
Exception Handling
Collect alarms. Based on the alarm, troubleshoot the problem by referring to System Alarm
Indicator On in the NetBackup 5000 Troubleshooting .