Bluetooth Moonlight Speaker
MODEL NO.: SP136
INSTRUCTION MANUAL
1. Preface
Please read this user's manual carefully before using the product to make a correct use of the play
functions and know well about the system connection and usage. Keep this manual in a safe place for
future reference.
Unpacking
Please unpack the unit carefully and make sure the following accessories are contained in it; put them
well and prevent them from missing.
2.
Accessories
□
SP136 Mobile Speaker: 1 piece
□
User's Manual: 1 piece
□
Micro USB charge cable: 1 piece
□
Aux cable 3.5mm: 1 piece
3. Introduction
®
This product is a Bluetooth sound system supporting stereo music, hands-free for answering
calls, equipped with digital signal processing technology, echo and noise removal feature. It is applied
to the different usages like office and house, etc., and it may be connected to most other equipment and
®
mobile phones supporting Bluetooth feature by means of wireless for hi-quality hands-free calls and
play the stereo music from other equipment and mobile phones.
4. Precautions
®
First thank you for buying SYLVANIA SP136 Bluetooth speaker. Please refer to this Users' Manual
before use to use it properly. The contents stated herein may be modified from time to time for better
service as the product properties and functions are changed without prior notice. For the sound
performances of the product, never use it in too cold, too hot, too dusty or humid places, especially:
1.
Moist or underwater conditions
2.
Near the heater or hi-temperature services
3.
Solarization
4.
Places apt to fall
5.
Never disassemble the combination audio; otherwise, it may invalidate the warranty.
Warnings
1. Please protect the product from water like water drops or splash. Do not put water containers
like vase onto the product to avoid any unexpected accidents.
2. Please check if the voltage of the power grid is the same with that specified on the power
adapter of this unit.
5. Introduction to product panel and functions
1. Line in 3.5mm jack
2. Micro USB charging port
3. On/Off Switch
4. LED indicator
5.Light button: switch On/Off the LED
6. Vol – key: short press to decrease the volume – Press and hold to go to Prev song
7. Vol + key: short press to increase the volume – Press and hold to go to Next song
8. Multi-function button (MFB): Play/Pause/answer a call / end a call / reject a call / redial last number
9. Microphone hole
TURN ON/OFF THE SPEAKER
There is an On/Off switch at the back of the speaker. Place it to ON position, you will hear a beep sound
from speaker and the quickly flashing blue indicator light indicates a successful boot, In order to save
power, put the switch to OFF position when the speaker is not in use.
LIGHT BUTTON
You can decide to switch on the LED Moon light at the base of the speaker or not with the LIGHT button
at the top of the speaker. When switched ON, the LED Moon light will change of color automatically after
some seconds. There are totally 7 different colors.
LED INDICATOR LAMP (LOCATED NEAR THE ON/OFF BUTTON):
®
BLUE
: The blue LED indicator lamp will flicker during the Bluetooth connection and pair and will flash
slowly after successful connection and pair.
RED
:
The red LED indicator lamp is ON when the unit is charging. It turns OFF when the unit is fully
charged.
Charge Mode:
Connect one end of the micro USB cable supplied together with the product to one free USB port of the
computer or to a USB wall charger (not included), and the other end to the DC 5V port located at the
back of the product to charge. The red LED charge indicator lamp will turn ON.
Remarks:
A. When one end of the MICRO USB connecting cable is connected to the computer (or wall plug) in
any state and at any time, and the other end is connected to DC 5V port of the product, the
lithium
battery will be charging.
B. It will take 2 hours for the lithium battery to be fully charged and the red LED indicator lamp will turn
off when the battery is charged completely.
C. A standard power adapter with DC 5V output (not included) may be used to normally charge the unit.
D. When the battery is low, the speaker will make a beep sound. When this occurs, please charge the
speaker.
6. Operation instructions
Pairing the speaker with Bluetooth devices (phone or music device)
Turn on the speaker.
Place the speaker and Bluetooth device (phone or music device) so that they are no further than 1 meter
from each other.
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the
manufacturer's instructions for instructions on enabling Bluetooth on your device.
Once you have activated Bluetooth on your device, select the speaker “
Sylvania SP136
” from the list of
available Bluetooth devices. If required, enter the password '0000' to confirm & finalize pairing.
Once paired successfully, you can hear a beep sound from speaker and the blue LED flashes one time
every three seconds. You can now start to use the speaker.
If pairing is unsuccessful, turn off the speaker first and then re-pair following the above steps.
Once you have paired the speaker with a device, the speaker will remember this device and will pair
automatically when the device's Bluetooth is activated and in range. You do not need to re-pair any
previously connected devices.
The speaker will attempt to automatically connect to the last device it was paired with when switched
on. If you want to pair it with a new device please long press MFB button until the blue led flash quickly
and follow the steps outlined above.
Once the speaker is paired with your device the music will transmit directly to the speaker. Please refer
to your device's user manual for further information.
Connection with AUX cable
You may also connect any device with a headphone socket using the 3.5mm audio cable (included).
Connect this cable to headphone socket of your device and to the AUX input on the speaker.
Listening to Music
Once the speakers are paired with your device you can stream music wirelessly to the speakers. Select
the track you wish to listen to and it will be streamed to your speakers. Should you encounter any
problems while streaming please refer your device's user manual for further information.
Volume control
Short press once or more the VOL- / Prev or the VOL+ / Next button to adjust the volume in the desired
level. When maximum or minimum volume is reached you will hear a beep.
Note: You may also adjust the volume from your Bluetooth® enabled device's volume control.
Play/Pause
Press the Play/Pause button to pause the music. To resume the music, press this button again.
Changing Songs
(with devices that have AVRCP Bluetooth® profile)
Press and hold the Next button to go to next song.
Press and hold the Prev button to go to previous song.
Making a call with the speaker
Basic operation
Incoming call:
Press the MFB button once to answer
Short press MFB button twice to reject the call
During call:
Press the MFB button once to end the call
In standby mode and connected to a device:
Short press MFB button twice to redial last number
Please Note
Not all mobile phones support all the functions listed above. Please refer to your cell phone's user's
manual for further information.
7. Mobile devices supported
®
In theory, it can support all equipments with Bluetooth music play features such as smartphones,
tablets, computers equipped with bluetooth technology, etc.
8. Main technical parameters
Specifications
Note:
Battery life & charging time may vary based on usage & types of devices used.
The product design and specifications may be changed without prior notice!
9. Guidance on simple troubleshooting
Remarks:
When the machine cannot work normally when the above-mentioned
troubleshooting instructions are followed, please go to the technical professionals or
after-sales service for help!
1
2
3
4
5
The picture is only provided for reference. Please refer to the actual unit!
