1-3-4
SFTY_5
Instructions for Handling
Semiconductors
Electrostatic breakdown of the semiconductors may
occur due to a potential difference caused by electro-
static charge during unpacking or repair work.
Ground for Human Body
Be sure to wear a grounding band (1M
Ω
) that is prop-
erly grounded to remove any static electricity that may
be charged on the body.
Ground for Work Bench
Be sure to place a conductive sheet or copper plate
with proper grounding (1M
Ω
) on the work bench or
other surface, where the semiconductors are to be
placed. Because the static electricity charge on the
clothing will not escape through the body grounding
band, be careful to avoid contacting semiconductors to
clothing.
Incorrect
Correct
CBA
CBA
Grounding Band
Conductive Sheet or
Copper Plate
1M
Ω
1M
Ω
Summary of Contents for 6313CC
Page 18: ...1 6 2 T5300DC Fig 1 S 1 S 1 1 REAR CABINET S 1 S 1 S 1 S 1 Fig 2...
Page 20: ...1 6 4 T5300DC Fig 4 CRT CBA S 5 S 5 S 5 S 5 ANODE CAP 5 CRT...
Page 75: ...Packing FRONT X 4 X 3 X 2 X 7 TAPE X 1 S 1 X 5 S 4 S 6 S 2 S 3 S 3 S 2 3 1 3 T5300PEX...
Page 92: ...Printed in Japan 2002 01 31 HO SC313C 6313CC EWC1302 T5300UA 2UC 3UD...
