1
SYL
VAN
IA is a registered tr
ademark of OS
RAM SYL
VAN
IA Inc., used under license.
STAINLESS STEEL RANGE HOOD
ITM./ART/ 555495
MODEL NO. 4SYY600STS (QCKB2006C)
IMPORTANT:
PLEASE NOTE WHEN YOU OPEN THE CARTON CAREFULLY CHECK
THE UNIT AND MAKE SURE THERE IS NO DAMAGE. IF YOU HAVE ANY
PROBLEMS WITH ASSEMBLING THE UNIT, WITH HOW THE VARIOUS
FUNCTIONS WORK OR WITH DAMAGE OR MISSING PARTS PLEASE
CALL 1-800-459-4409 (9:00AM - 5:00PM EST) IMMEDIATELY FOR
SERVICE.
READ & SAVE THESE INSTRUCTIONS
FOR RESIDENTIAL USE ONLY
PLEASE READ THIS GUIDE BEFORE INSTALLING AND USING YOUR
RANGE HOOD.
STORE THIS GUIDE IN A SAFE PLACE FOR CLEANING AND
MAINTENANCE REFERENCE.
INSTALLATION MUST COMPLY WITH ALL LOCAL CODES.
•
Requirement: 120V AC, 60Hz, 15 or 20 A branch circuit.
•
Read all instructions before proceeding.
•
Approved for residential use only.
•
Turn off power circuit breaker before wiring this appliance.
The manufacturer and distributors decline all responsibility in the event of failure
to observe the instructions given here for installation, maintenance and suitable
use of the product. The manufacturer and distributors further decline all respon-
sibility for injury due to negligence and the warranty of the unit automatically
expires due to improper maintenance.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS
APPLIANCE.
CAUTION
• DO NOT INSTALL IF THE APPLIANCE IS DAMAGED.
• ALL ELECTRICAL WIRING MUST BE PROPERLY INSTALLED, INSU-
LATED AND GROUNDED. OLD DUCT WORK SHOULD BE CLEANED OR
REPLACED IF NECESSARY TO AVOID THE POSSIBILITY OF A GREASE
FIRE. CHECK ALL JOINTS ON DUCT WORK TO ENSURE PROPER CON-
NECTION. ALL JOINTS SHOULD BE PROPERLY TAPED.
• PERSONAL INJURY HAZARD. BECAUSE OF THE WEIGHT AND SIZE OF
THE RANGE HOOD, TWO OR MORE PEOPLE ARE NEEDED TO MOVE
AND SAFELY INSTALL THE RANGE HOOD. FAILURE TO PROPERLY LIFT
RANGE HOOD COULD RESULT IN DAMAGE TO THE PRODUCT OR PER-
SONAL INJURY.
• SEVERE INJURY - RANGE HOOD MAY HAVE VERY SHARP EDGES. WEAR
PROTECTIVE GLOVES TO REMOVE ANY PARTS FOR INSTALLING, CLEAN-
ING OR SERVICING.
• ALWAYS LEAVE SAFETY GRILLS AND FILTERS IN PLACE. WITHOUT THESE
COMPONENTS, OPERATING BLOWERS COULD CATCH ON TO HAIR, FIN-
GERS AND LOOSE CLOTHING.
• NEVER DISPOSE OF CIGARETTE ASHES, IGNITABLE SUBSTANCES OR ANY
FOREIGN OBJECTS IN BLOWERS.
WARNING: THIS SAFETY ALERT SYMBOL ALERTS YOU TO POTENTIAL
HAZARDS THAT CAN KILL OR HURT YOU AND OTHERS. ALL SAFETY
MESSAGES WILL FOLLOW THE SAFETY ALERT SYMBOL AND THE WORD
“WARNING”.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE THE FOLLOWING CAREFULLY:
1) USE THIS UNIT ONLY IN THE MANNER INTENDED BY THE MANUFAC-
TURER. IF YOU HAVE ANY QUESTIONS REGARDING THIS RANGE HOOD,
CONTACT THE MANUFACTURER.
2) BEFORE INSTALLING, SERVICING OR CLEANING THE UNIT, SWITCH
POWER OFF AT THE MAIN JUNCTION BOX AND LOCK THE PANEL DOOR
TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY. IF
THE JUNCTION BOX DOOR CANNOT BE LOCKED, SECURELY FASTEN A
PROMINENT WARNING SIGN TO THE PANEL DOOR.
3) INSTALLATION OF ELECTRICAL WIRING MUST BE DONE BY A QUALI-
FIED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE LOCAL
AND NATIONAL CODES AND STANDARDS, INCLUDING FIRE CODES. THE
INSTALLER AGREES TO ABIDE BY THESE LOCAL AND NATIONAL REGULA-
TIONS AT THEIR OWN EXPENSE.
4) SUFFICIENT AIR IS NEEDED FOR PROPER COMBUSTION AND EXHAUST-
ING OF GASES THROUGH THE FLUE (DUCT WORK). FOLLOW THE RANGE
EQUIPMENT MANUFACTURER’S GUIDELINES AND SAFETY STANDARDS
SUCH AS THOSE PUBLISHED BY THE NATIONAL FIRE PROTECTION
ASSOCIATION (NFPA) AND THE AMERICAN SOCIETY FOR HEATING,
REFRIGERATION AND AIR CONDITIONING ENGINEERS (ASHRAE), AND
THE LOCAL CODE AUTHORITIES.
5) WHEN CUTTING OR DRILLING INTO A WALL OR CEILING, DO NOT DAM-
AGE ELECTRICAL WIRING AND HIDDEN UTILITIES.
6) DUCTED FANS MUST ALWAYS BE VENTED TO THE OUTDOORS. DO NOT
VENT EXHAUST AIR INTO SPACES WITHIN WALLS, CEILINGS, ATTICS,
CRAWL SPACES, OR GARAGES.
7) TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS
HOOD WITH ANY SPEED CONTROL DEVICE.
8)
WARNING: TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCT
WORK.
9)
WARNING: FOR GENERAL VENTILATION USE ONLY. DO NOT USE THE
RANGE HOOD FANS TO EXHAUST HAZARDOUS OR EXPLOSIVE VAPORS.
TO REDUCE THE RISK OF INJURY IN THE EVENT OF A RANGE TOP GREASE
FIRE, OBSERVE THE FOLLOWING:
1)
WARNING: SMOTHER FLAMES WITH A LID, COOKIE SHEET, OR
METAL TRAY, THEN TURN OFF THE BURNER. BE CAREFUL TO PREVENT
BURNS. IF THE FLAMES DO NOT GO OUT IMMEDIATELY, EVACUATE AND
CALL THE FIRE DEPARTMENT.
2)
WARNING: NEVER PICK UP A FLAMING PAN, YOU MAY BE
BURNED.
3)
WARNING: DO NOT USE WATER, INCLUDING WET DISHCLOTHS OR
TOWELS. A VIOLENT STEAM EXPLOSION MAY RESULT.
4) USE A FIRE EXTINGUISHER ONLY IF:
A) YOU KNOW YOU HAVE A CLASS ABC EXTINGUISHER AND YOU
ALREADY KNOW HOW TO OPERATE IT.
B) THE FIRE IS SMALL AND CONTAINED IN THE AREA WHERE IT
STARTED.
C) THE FIRE DEPARTMENT IS BEING CALLED.
D) YOU CAN FIGHT THE FIRE WITH YOUR BACK TO AN EXIT.
5) NEVER LEAVE RANGE UNATTENDED WHEN IN USE.
