3
Operating Instructions
Table Socket Strip
Item no: 2572668
1 Intended use
The product is a socket strip. It comes with clamps for mounting to a table
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
■
Product
■
2x table clamps
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code shown. Fol-
low the instructions on the website.
4 Description of symbols
The symbol warns of hazards that can
lead to personal injury.
The symbol warns of dangerous voltage
that can lead to personal injury by elec-
tric shock.
This product must only be used in dry,
enclosed indoor areas. It must not be-
come damp or wet, as this may cause a
fatal electric shock!
Read the operating instructions carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an authorised re-
pair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
■
Do not switch the product on after it has been taken from a cold to a warm environment. The con-
densation that forms might destroy the product. Allow the product to reach room temperature before
you use it.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the product.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-
anteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Mains cable
Do not modify or repair mains supply components including mains plugs, mains cables, and
power supplies. Do not use damaged components. Risk of death by electric shock!
■
The mains outlet must be located near to the device and be easily accessible.
■
Never plug in or unplug the mains plug when your hands are wet.
■
Never pull the mains plug from the socket by pulling at the cable. Always pull it from the mains socket
using the intended grips.
■
Unplug the mains plug from the mains socket if you do not use the device for an extended period of
time.
■
Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
■
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under mech-
anical stress.
■
Avoid excessive thermal stress on the mains cable from extreme heat or cold.
■
Do not modify the mains cable. Otherwise the mains cable may be damaged. A damaged mains
cable can cause a deadly electric shock.
■
Do not touch the mains cable if it is damaged.
– First, power down the respective mains socket (e.g. via the respective circuit breaker) and then
carefully pull the mains plug from the mains socket.
– Never use the product if the mains cable is damaged.
■
A damaged mains cable may only be replaced by the manufacturer, a workshop commissioned by the
manufacturer or a similarly qualified person, so as to prevent any danger.
■
Ensure that cables are not pinched, kinked or damaged by sharp edges.
■
Always lay cables so that nobody can trip over or become entangled in them. This poses a risk of in-
jury.
5.6 Connected devices
■
Also observe the safety and operating instructions of any other devices which are connected to the
product.
5.7 Product
■
Do not connect the product in series!
■
Do not operate the product while covered.
■
De-energised only when unplugged.
■
Take special caution when children are around. Children cannot recognize the danger arising from
the incorrect use of electrical devices. There is a risk of a life-threatening electric shock!
■
Only use in dry rooms.
5.8 Sockets
■
The product is equipped with an enhanced protection against accidental contact. An integrated mech-
anism will release the holes of the receptacle only, if the two prongs of a power plug are inserted into
the two holes at once.
6 USB port protection
The USB ports have the following protection: over-current.
When triggered the power supply to the port(s) will be interrupted.
Preconditions:
a
Protection mechanism has been triggered.
1. Disconnect the power supply to the socket.
2. Remove the conditions triggering the protection.
3. Reconnect the power supply to the socket
à
The power supply will resume when the condition(s) triggering the protection are removed.
7 Installation
Important:
■
The product can leave marks on sensitive surfaces
■
Risk of damage to surface material. Do not over-tighten the clamp
1. Find a suitable installation location.
≤60 mm
2. Place the product on the table and unscrew the table clamps.
3. Insert the table clamps into the slots on the product.
