SwyxPhone S315
Q U I C K S T A R T
SwyxPhone S315
Q U I C K S T A R T
SwyxPhone S315
Q U I C K S T A R T
01
Description
02
Menu Mode
You can set various functions from the menu.
t
Open the menu by pressing the menu button
. Use the
buttons to
navigate between the main menu entries Phonebook, Lists, DND List, Network
settings, SIP settings, Phone settings, Function key, Factory reset and Reboot. Each
main menu entry has various options. You select an entry, or an option, by
pressing the OK button . The setting activated at any time is marked with an arrow.
Navigation buttons
"Back/Delete"
button
"Redial" button
Volume
regulator
Display
OK button
Handsfree button
Menu button
"Mute" button
Function Keys
P1-P14 (see below)
Keypad
Function keys (default setting)
You can assign other functions to the buttons of the telephone.
t
Select Function keys in the main menu (see section 02 "
"), and
select the function that you want to assign to a function key.
t
Press the function key that is to be set with the selected function.
P1
P2
P3
P4
P5
P6
P7
P8 - P14
Hold/
Call
Swap
Transfer Conference
Do not
Disturb
Pick Up
Voicemail Headset
freely
definable
LED1 --> singals
Missed call
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
LED 1
LED 2
LED2 --> Mute
03
Initial Operation
t
Connect the SwyxPhone S315 to the LAN (via the RJ-45 jack
) and the
power supply. At the end of the startup process, an installation wizard is
called. This first tries to find a SwyxServer and a standby SwyxServer with
the help of the DNS service. If the DNS solution is unsuccessful, you will be
asked to enter the IP address manually for the SwyxServer and/or standby
SwyxServer.
t
Select the language you want.
t
Then log on by entering your User ID, with your user name and password.
t
Confirm the inputs by pressing the OK button.
The registration then takes place. The name configured for you in the
SwyxServer appears in the telephone display.
04
I want to make a phone call.
t
Use the keypad to enter the number you want to call. One character can be
corrected by briefly pressing the
button; a longer pressure on this button
removes the complete number.
t
Then lift the handset, or press the
button to start the dialing and use
the handsfree facility.
Note: When making outgoing external calls you may need to dial 9 to get
public line access.
05
It’s ringing, I would like to answer the call.
A call is signaled by a ringing tone, and the call appears in the display.
t
Answer the call by lifting the handset.
If you want to use the handsfree telephone facility, pick
up the call by pressing the handsfree button, without
lifting the handset.
Reject Call
Das SwyxPhone S315 rings.
t
Press the OK button and select Reject in the display.
t
Press the OK button again. The call is rejected, and therefore goes to your
Swyx voicemail.
06
I would like to pick up a signaled call.
A call is signaled in the display, and the Pick Up button
glows red. A signal also sounds.
t
Press the pickup button to pick up the call (in this case Jones, Tom to
Dupont, Marie), and lift the handset.
L1: Incoming Call...
Dupont, Marie
Accept
Reject
Jones, Tom
==>Dupont, Marie
07
I would like to make a second telephone call.
You are having a telephone conversation.
t
During the active call, press on the Hold/Call Swap button to put the first call
on hold. The caller put on hold hears music on hold.
t
Then dial the number of the other subscriber.
The second call is set up.
t
You can switch between the callers by pressing again on the Hold/Call Swap
button.
08
I want to transfer a call.
You are having a telephone conversation.
t
Press the Hold/Call Swap button to put the first call on hold.
t
Enter the number to which the call should be connected. The call will be
initiated.
t
As soon as the second subscriber picks up the call, press the Transfer button
to transfer the call.
09
I want to initiate a conference.
You are having a telephone conversation.
t
Press the Conference button. The first subscriber is put on hold and hears
music on hold.
t
Dial the number of the other conference participant.
As soon as this person picks up the call, all three users
are immediately in the conference.
t
If you press the Conference button again, the numbers are displayed on the
corresponding lines.
Note: If you have initiated a conference, it will be ended if you go on hook.
10
I would like to phone hands free or to use the speaker.
You are telephoning and using the handset.
t
If you press the Handsfree button
, the speaker is activated and you can
phone hands free. As soon as the handsfree mode is active, you can put the
handset on hook.
t
By pressing the button a second time you can continue to telephone on the
handset as usual.
Note: You can use + and - to adjust the volume of the speaker, handset and
headset.
L2: Dialing
288
L1/L2:Conference
00:00:55
quickstart_S315.fm Seite 1 Mittwoch, 28. November 2007 2:43 14