manualshive.com logo in svg

Swyx SwyxPhone L6 series, User Documentation

Share
Download
Swyx SwyxPhone L6 series User Documentation Download Page 129

Telephoning with SwyxPhone L66  

  Other Options for Dialing a Number     

127

You can correct your entry using the arrow button “Back” 

.

3.

Press the "OK" button. 
or 
Wait for six seconds.

 The participant is called.

With the handset on hook and the speaker deactivated: 

1.

Use the numeric keypad to dial the number you want.

2.

Pick up the handset or press the Speaker button.

3.

Press the "OK" button. 
or 
Wait for six seconds.

 The participant is called.

If the connection to the destination subscriber has not yet been 
made, “ringing” will appear in the display. The number or, if 
available, the name of the destination subscriber and the line 
number will appear in the next line:

If all of the destination subscriber’s lines are busy, the word “busy” 
will appear:

The default delay time (6 seconds) for the automatic block dialling can be 
adjusted in “Service/Settings | User | Configuration | Outgoing calls |

 

Autodial delay (s)”.

<destination 

<Number>

ringing

Line 1

Callback request

Disconnect

If the connection is made, the call duration will appear in the first 
line of the display. The line number and the number or name of the 
destination subscriber will appear in the next displaylines:

14.2

Other Options for Dialing a Number

This is how you call a subscriber from “Favourites”  

1.

Press the upper “Favourites” option key.

The function key list appears:

Dupont, Marie

288

Busy

Line 1

Busy

Callback request

Disconnect

Dupont, Marie

288

Line 1

00:58

Callback request

Call Transfer

Call Swap

Disconnect

Note

Summary of Contents for SwyxPhone L6 series















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands