manualshive.com logo in svg

Swyx SwyxPhone L6 series, User Documentation

Share
Download
Swyx SwyxPhone L6 series User Documentation Download Page 124

Control elements of SwyxPhone L66  

  Buttons     

122

Menu navigation

SwyxPhone L66

SwyxPhone L66 is controlled with five navigation buttons.

Volume /-

You can use the +/- buttons to adjust the volume of the

 

speaker and the handset, depending on which one is cur-
rently active.
The volume setting will stay at this level for the next call.
You can also use these buttons in the configuration menu to change the

 

ringing volume (see chapter 16.2.1, 

Ring tones

, page 162).

Control element

Function when button is pressed

Arrow button "Down"

In lists and menus:

Scroll down

Arrow button "Up"

In lists and menus:

Scroll up

Arrow button "Forward"

Menu level lower (only if corresponding menu 
option is marked with 

 .)

Arrow button "Back"

cancel action

delete a character

menu level higher

"OK" button

menu level lower

Confirm entry

Activate option

OK

Microphone

You can use this button to switch off the handset micro-
phone or handsfree microphone for a while, so that the call 
partner cannot listen e.g. to an inquiry in the room.

Speaker

When the telephone is in an active state (a conversation is in

 

progress), the Speaker button is used to switch the speaker 
on or off. This allows other people present in the room to lis-
ten to the conversation. You can then turn the speaker off 
again and continue the conversation on the handset.
In an idles state (if no call is currently being made), pressing the Speaker 
button has the same effect as picking up the handset; you can immedia-
tely dial a number and place your call using the handsfree telephone. 
The LED of the Speaker button will glow as long as the handsfree tele-
phone is activated. If the handset is on hook, end the call by pressing the

 

Speaker button.

Headset

The Headset button allows you to switch between using the

 

headset or the handset.
For further information please refer to chapter 15.7, 

Using a 

headset

, page 156. 

Option keys

The five option keys are right beside the display.Each option

 

key corresponds to one display line. You can invoke the cur-
rently displayed option or function. 

Call Forwarding Unconditional

With the “Unconditional Forwarding” button you can

 

directly deactivate the unconditional call forwarding, preset 
in the main menu. 
For further information please refer to chapter 14.15.1, 

Define Call Forwar-

ding Unconditional

, page 137.

Summary of Contents for SwyxPhone L6 series















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands