Swyx SwyxPhone L6 series User Documentation Download Page 108

Page: 108 / 206

SwyxPhone L64 Configuration

Settings in the Configuration Menu

106

12.2.1 Ring tones

The telephone ring for incoming calls is selected here. You define the

telephone ring for calls from outside the company under “External” and

for calls from within the company under “Internal”.

Feature dialogue

Call Signaling

Configuration

Ring tones

Lines

Function keys

Speed dials

Incognito = off

Transf. on Hookon = on

Back

Feature dialogue

External

Ring tones

Internal

Back

You can choose from seven different ringing tones. You can select the

ringing sound you want using the arrow buttons and adjust the volume

using the “+/-” buttons.

12.2.2 Call Signaling

The administrator can configure the system in such a way that incoming

calls for you are signaled to another subscriber. The incoming calls for
this subscriber will also be signaled to you. If such signaling has been

defined, then the incoming calls for this subscriber will appear on your
display. If the destination subscriber does not pick up the call, you will
hear a single warning tone after 10 seconds. This tone can be turned off
here.

The call signaling will still only be visually indicated.
If several subscribers, whose calls are signaled to you, receive a call at
the same time, only one name will be shown in the display. The other
calls will only be indicated by the blinking of the corresponding Speed

Feature dialogue

02/07

Ringing internal

01/07

03/07

04/07

Feature dialogue

Configuration

Call Signaling =on

Lines

Function keys

Ring tones

Summary of Contents for SwyxPhone L6 series















































































































































































































Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Related manuals for SwyxPhone L6 series

Brands by name

Popular brands

Swyx SwyxPhone L6 series, User Documentation

Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Related manuals for SwyxPhone L6 series

Brands by name

Popular brands