The security checklist
8-3
8.2.1
Wizard for LANconfig
1.
Mark your SwyxConnect in the selection window. Select from the
command bar
Extras
Setup Wizard
.
2.
Select in the selection menu the setup wizard
Configuring
Firewall
and confirm your choice with
Next
.
3.
In the following windows, select the services/protocols the rule
should be related to. Then you define the source and destination
stations for this rule and what actions will be executed when the
rule will apply to a data packet.
4.
You finally give a name to the new rule, activate it and define,
whether further rules should be observed when the rule will apply
to a data packet.
5.
The wizard will inform you as soon as the entries are complete.
Complete the configuration with
Finish
.
8.2.2
Configuration under WEBconfig
Under WEBconfig it is possible to check and modify all parameters
related to the protection of the Internet access under
Configuration
Firewall / QoS
Rules
Rule Table.
8.3
The security checklist
The following checklist provides a comprehensive overview of all
security settings for professionals. Most of the points on this checklist
are no subject of concern in simple configurations, since these
generally adequate security settings are already implemented during
basic configuration and by the security wizard.
Detailed information on the security settings listed here can be found
in the reference manual.
Summary of Contents for SwyxConnect 1722
Page 112: ...I 5 ...
