5
6
7
8
7
On: The connection to the base station is good.
Flashing: The connection to the base station is interrupted. Move nearer
to the base station.
Constant: The answering machine is switched on.
Flashing: New messages have been recorded.
Standby mode
All descriptions in this operating manual assume that the handset is in Standby mode, which is
the case when you are not talking on the phone and if a menu is not open.
Press
h
to enable Standby mode.
Energy−save mode
When the handset has been in Standby mode for some time, it automatically switches to en-
ergy−save mode. The buttons and display no longer light up.
Navigating in the menu
All the functions can be accessed via the various menus. Refer to the Menu Structure on
Page 12 for information on how to access each respective function.
The functions assigned to the
=
/
;
buttons are activated by sliding the Navigation but-
ton up / down;
Page 5, Pos. 4.
m
Open the main menu
=
/
;
Select the required submenu
m
Open the submenu
=
/
;
Select the required function
m
Open the function
=
/
;
Select the required setting
Use the keypad to enter digits or letters
m
Confirm the input
b
Move one level back
h
Abort programming and saving processes and
return the handset to Standby mode
Every process is automatically cancelled if there is no input within 15 seconds.
Creating phone book entries − example
The way in which to navigate through the menus and select settings is explained by means of
the example
Creating phone book entries
. Proceed as in this example for all the settings.
m
Open the main menu
=
/
;
Phonebook
,
m
Select a menu and confirm it
=
/
;
New Entry
,
m
Select the submenu and confirm it
,
m
Enter the name (max. 10 characters) and confirm
it
,
m
Enter the phone number (max. 20 digits) and
confirm it
=
/
;
Ring Melody ,
m
Select a melody and confirm it
