18
Preparing the base station for use
CX 253i / SWZ PTT en / A31008-X353-P100-1-19 / starting.fm / 03.12.2007
Setting the receive MSN
The display shows:
Set incoming MSN?
The receive MSN is used to answer incoming calls. The MSNs allocated to your ISDN
connection can be allocated to various end devices according to your preferences. You
can assign an end device multiple receive MSNs.
This sequence is repeated for all handsets registered for your telephone and for the
integrated answering machine.
Setting the send MSN:
The display shows:
Set outgoing MSN?
Each internal user can be assigned exactly one of the available send MSNs. It is
identified to the person called and the network provider bills the call charges to this
MSN. Each end device can be assigned exactly one of the available send MSNs.
This process is repeated for all handsets registered on your base station.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
Press the display key to confirm the prompt.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
Press the display key to confirm the
Set allocation
Internal 11 ?
prompt.
The list of entered MSNs is displayed.
s
MSN 1:12345678
Select the MSN which should be assigned to this end
device, and confirm.
Repeat this sequence for all MSNs which should be
assigned to this end device as a receive MSN.
j
Briefly
press the exit menu key, to complete the
assignment for this terminal.
OK
i
When setting the receive MSN for an answering machine, only the MSNs
are offered in the MSN list which have not yet been assigned to another
answering machine.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
Press the display key to confirm the prompt.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
Press the display key to confirm the
Set allocation
Internal 11 ?
prompt.
The list of entered MSNs is displayed.
s
MSN 1:12345678
Select the MSN which should be assigned to this end
device, and confirm.
j
Press the display key to end this assignment for this
terminal.
OK
i
The MSN must be programmed without the area code (e.g. 031).
