Swisscom Aton CLT418ISDN, User Manual

Page: 28 / 76

26
2040522
3en_
ba_b0
Telephoning
1. Press the softkey under . Use to scroll through the list to find the entry you
are seeking, and press the softkey under , .
2. Write and send your SMS message.
When the called number is busy, the automatic redial function can be activated from
the "Options" menu. The interval as well as the number of redials can be set in the
"Options" menu. Once automatic redial is activated, the phone emits an alert (for
approx. 30 seconds) after a set interval.
The user then has three options:
 Automatic redial can be deactivated using the left softkey (OFF). This cancels
dialing and deactivates the ringtone.
 If the right softkey (YES) or the talk key is pressed, the set number is automatically
dialled and at the same time automatic redial is deactivated. If the called number is
still busy, automatic redial must be re-activated via the "Options" menu.
 If, while the alert is emitted, no key is pressed or the "End call" key is pressed,
redial remains activated and the next reminder signal is emitted after the set
interval. This is repeated for as many times as redials are programmed.
Note The interval therefore applies only to option 3.
You can activate a group call to locate a mislaid handset.
1.
Press on the base station. The mislaid handset rings.
2. Press again to end the ringing signal or press on the handset or
the softkey under "Reject".