7
First Steps
Aton CL700 IP / Swisscom EN / A31008-M1713-F161-1-2X43 / starting.fm / 27.9.06
Ve
rs
ion 4,
16
.09.
2005
Setting the date and time
If the date and time have not yet been
set in the phone, the display key
§Time§
is displayed. Later you can set the date
and time via the menu
v Ð
Settings
¢
Date/Time
.
¤
Press
§Time§
or open the menu.
¤
Change multiple line input:
Date:
Enter day, month and year in 6-digit
format.
Time:
Enter hours and minutes as 4 digits
(e.g.
Q M 1 5
for
07:15 a.m.
§Save§
Press the display key.
The date and time are shown in the hand-
set's idle display (page 1).
Registering the handset to the base
station
Your handset is registered to the base sta-
tion by default.
Instructions on how to register further
handsets to the base station and make
internal calls free of charge can be found
in the detailed user guide (page 5).
Installing the base station
The base station is designed for use in
closed, dry rooms with a temperature
range of +5 °C to +45 °C.
¤
Place or hang the base station in a cen-
tral position in your flat or house.
Please note:
u
Never expose the telephone to heat
sources, direct sunlight or other electri-
cal appliances.
u
Protect your Aton CL700 IP against
moisture, dust, corrosive liquids and
vapours.
Wall-mounting the base station
Note:
Date/time are not automatically updated dur-
ing incoming calls.