Swisscom Aton CL700 IP User Giude Download Page 39

Page: 39 / 106

SMS (text messages)

Aton CL700 IP LBA / Swisscom EN internet / A31008-M1713-F161-1-XXXX / sms_BRD_neutral.fm / 16.10.06

ion 4,

.09.

2005

SMS status report

Precondition

: Your network provider sup-

ports this feature.
If you have activated the status report, you

will receive an SMS with a confirmation

message after sending.

Activating/deactivating a status report

Messaging

SMS

Settings

Status Report

Select and press

§OK§

(

= on).

Reading/deleting a status report

Open the incoming message list

(page 37) and then:

Select SMS with the

State OK

State not OK

status.

§Read§

Press the display key.

Or:

§Delete§

Press the display key. The SMS

is deleted.

Draft message list

You can save an SMS in the draft message

list and edit and send it later.

Saving an SMS in the draft message list

You are writing an SMS (page 34).

§Options§

Press the display key.

Save

Select and press

§OK§

Opening the draft message list

Messaging

SMS

(mailbox, mailbox PIN)

Outgoing (3)

Select and press

§OK§

. The

number of the SMS messages

in the list will be shown in

brackets (e.g.(

)).

The first list entry is displayed, e.g.:

Reading or deleting individual SMS

messages

Open the draft message list and then:

Select SMS.

§Read§

Press the display key. The

entry will be displayed. Scroll

line by line using

Or:

§Options§

Open menu.

Delete Entry

Press

§OK§

. The SMS is deleted.

Writing/editing an SMS

You are reading an SMS in the draft

message list.

§Options§

Open menu.

You have the following options:

New SMS

Write a new SMS and then send

(page 34) or save it.

Edit

Edit the text of the saved SMS and then

send (page 34).

Character Set

Text is shown in the selected character

set.

Deleting draft message list

Open the draft message list and then:

§Options§

Open menu.

Delete all

Select,

press

§OK§

and confirm

with

§Yes§

. The list is cleared.

Press

and

hold

(idle status).

* is currently not supported in the Swisscom

network.

Note:

After saving, the SMS editor with your SMS will

be displayed again. You can continue writing

the text and save it again. The SMS that was

saved previously will be overwritten.

1234567890

21.09.05 09:45

Summary of Contents for Aton CL700 IP











































































































Search results

Summary of Contents for Aton CL700 IP

Reviews:

Brands by name

Popular brands

Swisscom Aton CL700 IP, User Giude

Search results

Summary of Contents for Aton CL700 IP

Reviews:

Brands by name

Popular brands