Swisscom ATON CL401, User Manual

Page: 47 / 74

46
Aton CL401 ISDN / SWZ-EN / A31008-M395-F151-1-2X19 / registr_sett.fm / 7.5.08
Ve
rs
ion 4,
16
.09.
2005
Changing the handsfree/
earpiece volume
You can set the loudspeaker volume for
handsfree talking to five different levels
and the earpiece volume to three different
levels.
In idle status:
t
¢
Handset Volume
r
Set the earpiece volume.
s
Scroll to the Speaker: line.
r
Set the handsfree volume.
§Save§
Press display key if necessary
to save the setting perma-
nently.
Setting the volume during a call:
t
Press the control key.
r
Select volume.
§Save§
Press display key if necessary
to save the setting perma-
nently.
The setting will automatically be saved
after approx. 3 seconds, if not then press
the display key
§Save§
.
If
t
is assigned with another function,
e.g. toggling (page 22):
§Options§
Open menu.
Volume
Select and press
§OK§
.
Configure setting (see above).
Changing ringer tones
u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 =
ˆ
) and
the "crescendo" ring (6; volume
increases with each ring =
‰
).
u Ringer tones:
You can select various ringer tones,
melodies or any sound from My stuff
(page 48).
You can set different ringer tones for the
following functions:
u
Ext. Calls
: for external calls
u Internal Calls : for internal calls
u
Appointments : for set appointments
(page 50)
u
All
: the same ringer tone for all func-
tions
Settings for external calls
During setup (page 54), each receive MSN
is automatically assigned a ringer tone.
You can change this assignment.
In idle status:
t
¢
Ringer Settings
¢
Ext. Calls
Setting the volume
Volume
Select and press
§OK§
.
r
Set volume (1–6).
¤
Save the changes.
Setting ringers
Melody Select and press
§OK§
.
q
Select MSN, e.g. MSN 1 and
press
§OK§
.
r
Select melody.
§Save§
Press the display key to save
the setting.
Please note:
You can also set the call volume, the ringer
tones and the advisory tones via the menu
(see page 17).