41
Aton CL401 ISDN / SWZ-EN / A31008-M395-F151-1-2X19 / registr_sett.fm / 7.5.08
Ve
rs
ion 4,
16
.09.
2005
If the internal participant answers,
either:
§Options§
Press the display key.
End Active Call
Select and confirm.
You are reconnected with the
external participant.
or:
§Conference§
Press the display key.
All 3 participants are con-
nected with each other.
Ending a conference call
a
Press the end call key.
If an
internal
participant presses the end
call key
a
, the other handset remains
connected to the external participant.
Accepting/rejecting call waiting
If you receive an
external
call during an
internal
call, you will hear the call waiting
tone (short tone). With Calling Line Identi-
fication, the caller's number will appear in
the display.
Accepting an external waiting call during
an internal call
§Accept§
Press the display key.
You accept the waiting call and the inter-
nal call is put on hold. Both parties are
shown on the display; the current one is
marked.
You can toggle (page 22) or set up a con-
ference call (page 23).
Rejecting the external call
§Reject§
Press the display key.
The call waiting tone is turned off. You
remain connected with the internal partic-
ipant. The ringer can still be heard on
other registered handsets.
Changing the name of a handset
The names "INT 1", "INT 2" etc. are
assigned automatically at registration.
You can change these names. The name
must be no more than 10 characters. The
changed name is displayed in every hand-
set's list.
u
Open list of handsets. Your
own handset is indicated by
<
.
s
Select handset.
§Edit§
Press the display key.
~
Enter name.
§Save§
Press the display key.
Changing a handset's internal
number
A handset is
automatically
assigned the
lowest free number on registration. If all
slots are occupied, number 6 is overwrit-
ten if this handset is in idle status. You can
change the internal number of all regis-
tered handsets (1–6).
u
Open the list of handsets. Your
own handset is indicated by
<
.
§Options§
Open menu.
Edit H/Set No.
Select and press
§OK§
. The list of
handsets is displayed.
s
The current number flashes.
Select a handset.
~
Enter the new internal number
(1–6). The handset's old
number is overwritten.
§Save§
Press the display key to save
the input.
a
Press
and
hold
(idle status).
You will hear the error tone (descending
tone sequence) if you assign an internal
number twice.
¤
Repeat the procedure with a free
number.