Swisscom ATON CL401, User Manual

Page: 34 / 74

33
Aton CL401 ISDN / SWZ-EN / A31008-M395-F151-1-2X19 / sms_BRD_neutral.fm / 7.5.08
Ve
rs
ion 4,
16
.09.
2005
You have the following options:
New SMS
Write a new SMS and then send
(page 31) or save it.
Edit
Edit the text of the saved SMS and then
send it (page 31).
Character Set
Text is shown in the selected character
set.
Deleting draft message list
¤
Open the draft message list and then:
§Options§
Open menu.
Delete all
Select, press
§OK§
and confirm
with
§Yes§
. The list is cleared.
a
Press and hold (idle status).
Sending SMS messages to an e-mail
address
*
If your service provider supports the SMS
to e-mail feature, you can also send your
SMS messages to e-mail addresses.
The e-mail address must be at the begin-
ning of the text. You must send the SMS to
the e-mail service of your SMS send cen-
tre.
v
¢
î
¢
New SMS
Œ
/
~
Load the e-mail address from
the directory or enter it
directly. End the entry with a
space or colon (depending on
the service provider).
~
Enter the SMS text.
§Options§
Press the display key.
Send Select and press
§OK§
.
E-mail Select and press
§OK§
. If the
number of the e-mail service is
not entered (page 36), enter
the number of the e-mail serv-
ice.
§Send
Press the display key.
Sending SMS messages as a fax
**
You can also send an SMS to a fax
machine.
Precondition : Your network provider sup-
ports this feature.
¤
Write an SMS (page 31).
§Options§
Press the display key.
Send
Select and press
§OK§
.
Fax Select and press
§OK§
.
s
/
~
Select number from the direc-
tory or enter directly. Enter the
number with area code (even
if you are in the same area).
§Send
Press the display key.
Receiving an SMS
All received SMS messages are saved in
the incoming message list. Linked SMS
messages are displayed as one message. If
this is too long or is not transferred com-
pletely, it is split into individual messages.
Since an SMS remains in the list even after
it has been read, you should regularly
delete SMS messages from the list .
The display tells you if the SMS memory is
full.
¤
Delete SMS messages you no longer
require (page 34).
¤
You can only delete SMS messages that
were sent to MSNs for your handset. If
the memory is taken up by SMS mes-
sages that have been sent to other
MSNs, a notification to this effect will
appear on the display.
* Dependent on the provider; currently
not supported on the Swisscom net-
work.
** Dependent on the provider; currently
not supported on the Swisscom net-
work.