17
First steps
Gigaset E500H / Aton CL317 / Schweiz PTT EN / A31008-M2256-F151-1-2X19 / first_steps.fm / 07.07.2010
Charging batteries
The correct charge status can only be displayed if the battery is first
fully charged
and
then discharged.
¤
Place the handset in the base with its
display facing forward
for
6.5 hours
.
¤
After charging, remove the handset from the base and only
replace it when the batteries are fully discharged.
Please note
The handset must only be placed in the designated base or the
corresponding charger.
6.5h
Please note
u
After the first battery charge
and
discharge, you may place
your handset in the charger after every call.
u
Always repeat the charging and discharging procedure if you
remove the batteries from the handset and reinsert them.
u
The batteries may warm up as they are charging. This is not
dangerous.
u
After a time the charge capacity of the batteries will decrease
for technical reasons.
