28
Appendix
Gigaset S68H / SWZ PTT en / A31008-M1956-F151-2-2X19 / main.fm / 22.4.08
Ve
rs
ion 4,
16
.09.
2005
Changing the Bluetooth name of the
handset
You can change the handset name used to
identify it on the display of another Blue-
tooth device.
v
¢
í
¢
Data Transfer
¢
Bluetooth
¢
Own Device Name
§Change§
Press the display key
~
Change the name.
§Save§
Press the display key
a
Back: Press and
hold
key.
Setting your own area code
In order to transfer phone numbers (e.g.
in vCards), it is essential that your area
code (international and local area code) is
saved on the phone.
Some of these numbers are already pre-
set.
v
¢
Ð
¢
Handset
¢
Area Codes
Check that the (pre)set area code is cor-
rect.
¤
Change multiple line input:
q
Select/change input field.
r
Navigate in the input field.
X
If necessary, delete number:
press the display key.
~
Enter number.
§Save§
Press the display key.
Example
:
Restoring the handset to the
factory settings
You can reset any individual settings and
changes that you have made. Entries in
the directory, the call-by-call list, the call
history, the SMS lists (depending on base
station) and the handset's registration to
the base station as well as the content of
My stuff are retained.
v
¢
Ð
¢
Handset
¢
Reset Handset
§Yes§
Press the display key.
a
Press
and
hold
(idle status).
Appendix
Care
¤
Wipe the charging cradle and the hand-
set with a
damp
cloth (do not use sol-
vent) or an antistatic cloth.
Never
use a dry cloth. This can cause a
build up of static.
Contact with liquid
If the handset has come into contact with
liquid:
1.
Turn the handset off and remove the
batteries immediately
.
2. Allow the liquid to drain from the hand-
set.
3. Pat all parts dry, then place the handset
with the battery compartment open
and the keypad facing down in a dry,
warm place
for at least 72 hours
(
not
in a microwave, oven etc.).
4. Do not turn on the handset again un-
til it is completely dry.
When it has fully dried out, you will nor-
mally be able to use it again.
Area Codes
International code:
0000
- 41
Local area code:
0 - [ 44 ]
X
Save
!
