27
Making calls
Aton CL113 Duo / Swisscom en / A31008-M2202-F151-1-2X19 / telefony.fm / 07.07.2011
V
e
rsion 4, 16.0
9
.2005
Notes on phone number
display (CLIP)
By default, the number of the caller is shown
in the display of your telephone. You do
not have to make any other settings on your
telephone.
However, if the caller's number is not
displayed, this can be due to the
following:
u
You have not ordered CLIP from your net-
work provider or CLIP is not working.
u
Your telephone is connected via a PABX
or a router with an integrated PABX (gate-
way) that does not transmit all informa-
tion.
Is your telephone connected via a
PABX/gateway?
You can establish this by checking for an
additional device connected between your
telephone and home connection, e.g., a
PABX, gateway etc. In most cases, simply
resetting this device will remedy the situa-
tion:
¤
Briefly disconnect the PABX power plug.
Re-insert the plug and wait for the device
to restart.
If the caller number is still not
displayed:
¤
Check the CLIP (phone number display)
settings of your PABX and activate this
function if necessary. In the user manual
for the device, search for the term "CLIP"
(or an alternative term such as "calling
line identification", "phone number trans-
mission", "caller ID" etc.). If necessary, con-
tact the device manufacturer.
If this does not resolve the problem, it is pos-
sible that your network provider does not
provide the CLIP service for this number.
Have you requested the phone
number display service from your
network provider?
¤
Check whether your provider supports
phone number display (CLIP) and that the
function has been activated for you. If
necessary, contact your provider.
Handsfree operation
In handsfree mode, you activate the loud-
speaker so that you can hear the caller with-
out having to hold the handset to your ear.
You therefore have both hands free and
other people can listen in on the conversa-
tion.
Activating/deactivating handsfree
mode
During a call, activate or deactivate hands-
free mode.
d
Press the handsfree key.
Each key press switches
between earpiece and hands-
free mode. If handsfree mode is
activated, the key is lit up.
If you wish to place the handset in the
charger during a call:
¤
Press and hold handsfree key
d
while
placing the handset in the base/charger
and for a further 2 seconds.
For instructions on adjusting the handsfree
volume, see page 39.
Please note
Inform your caller before you use the
handsfree function so that the caller
knows a third party may be listening.
