25
Assistance call operation mode
Enter PIN-code (factory pre-set: 0000).
The setting is stored.
Select another function using the arrow keys or exit the
programming menu with the C-key.
Remark:
To deactive this function select „Switch assist. call off“ within the nenu.
Sending an assistance call
After pressing the assistance call key, up to 3 stored assistance call numbers will
be dialled one after the other. The numbers must be stored and the assistance
call operation mode must be activated.
Press the assistance call key. The currently dialled number
will be shown in the display (assistance number 1 - 3).
The assistance call key and the loudspeaker key light red.
Hands-free mode is activated.
If the assistance call will be answered:
You hear the recipient of the assistance call via the
loudspeaker. Speak to him in hands-free mode.
Finishing the assistance call:
When the recipient of the assistance call replaces the hand-
set, your telephone automatically disengages the line. The
red light of the assistance call key and the loudspeaker
key goes out.
Causion:
If the caller holds the connection for less than 10 seconds, the call
was not successful und the next number will be dialled.
If you dial an assistance call number and hear an announcement
(e.g. „The number you have dialled is engaged. Do you want the …
service“), the call is regarded as accepted and the next telephone
number will not be dialled.
If the assistance call is picked up an answering machine, then it
