Initial operation
8
Connect handset
Plug the curled handset cable plug into the jack marked with a handset symbol
on the bottom of the device and into the handset jack.
Connect telephone to C/O line
Plug the small plug of the telephone connecting cable into the jack with the
telephone symbol
. Placed the cable in the duct provided.
The large plug is
to be plugged into the telephone wall socket of your telephone connection.
Caution:
Use only the connection cable supplied with the telephone. Other
cables may have a different pin configuration with the consequence that the
telephone does not work.
Connect telephone to „Power“
Plug the AC adapter cable plug into the jack with the adapter symbol .
Placed
the cable in the duct provided.
Plug the AC adapter into a power outlet to
connect the device to the 230 V mains power system. The telephone is now
ready for use and you can make calls.
Caution:
Use only the AC adapter supplied (type G090020A25).
Disconnect the cables
Unplug the AC adapter from the power outlet and unplug the telephone plug
from the telephone wall socket. At the telephone: pull the plug's locking clips
towards the plug's body to unplug and disconnect the cables.
1
2
3
