manualshive.com logo in svg

Swiss Egro 70 Series, Operating Instructions Manual

Share
Download
Swiss Egro 70 Series Operating Instructions Manual Download Page 43

Serie 70

 

 

 

 

 

17.04.2012

 

Page  41

 

 

9 

Service-messages 

The following display messages refer to maintenance activities. 

9.1 

Display message waste container full  

The waste container is full. Therefore, all coffee functions are disabled temporarily.  
Empty and clean the waste container. When pulling out the waste container 

Container 5

 is displayed. 

The number is counted backwards by seconds. After successful counting the message 

Container 

full

 is reset. The message 

No container

 is displayed.  

 

The waste container can be inserted only if emptied (danger of congestion). 

 
After the waste container is put back the message is deleted. The coffee functions are enabled again. 
This message does not apply for machines with an integrated waste removal. 
 

9.1.1 

Removal of waste container 

 

 

 

1. 

Turn the steam dispenser by 90°     to the left or to the right (steam dispensing is disabled) 

2. 

Pull out the waste container and empty, clean and put back the container. 

 

 

Danger 

The steam dispenser may be hot if steam has been dispensed previously. 

Danger of scalding!

 

 

Summary of Contents for Egro 70 Series





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands