Rubber Washer
NOTE
: Drawings may not exactly define contour of china.
7. Secure Tank to Bowl
Slide the metal washer and the rubber washer onto the bolt.
Thread the bolts into the bottom of the tank tighten the bolts using a screwdriver.
NOTE: Do not over tighten! Over tightening can lead to the ceramic cracking.
8. Position Toilet
Metal
Washer
Bolt
— 6 —
9. Drill Holes
Remove the toilet and measure the thickness of the bowl.
Apply that measurement in towards the center from the
marks you made on the floor as shown then drill.
Drill holes into the locations on wall marked from tank.
Thickness of the toilet
bowl measurement
edge of the
toilet marking
Position toilet into desired place and make sure it
is level.
Using a pencil mark the location of the holes
inside the tank onto the wall.
Draw one line around the base of the toilet and
one perpendicular from the holes located on both
sides of the bowl.
