5
OPERATING YOUR TRAILCUTTER
The operation of any mower can produce foreign objects to be thrown into the eyes, resulting in severe eye
damage. Always wear certified safety glasses or wide-vision safety goggles over spectacles before staring any
cutting machine and while operating such a machine.
The operation of any cutter produces sound waves that are damaging to the human ear. Ear protection is
recommended.
CAUTION! Tragic accidents can occur if the operator is not alert to the presence of children.
Children are often attracted to the machine and the mowing activity. Never assume that children will
remain where you last saw them.
INTENDED USE
The 52” Rugged Cut Trailcutter is designed to clear dense areas of grass and cut saplings
up to 2-1/2 inch thick on meadows and small estates. It is not intended to create a finish
cut on lawns.Your Trailcutter should be towed behind an ATV, golf cart, lawn tractor or
other approved vehicle. It is not recommended for speeds exceeding 5 MPH.
ATTACHING TRAILCUTTER TO TOW VEHICLE
•
Back vehicle up to desired towing position. (Tow bar may be attached to
center location or either side)
•
Attach 2” ball coupler to vehicle with corresponding ball.
TRANSPORTING CUTTER
•
Stop Trailcutter.
•
When transporting unattached from tow vehicle, remove spark plug wire and
place it where it cannot contact the spark plug.
STOPPING THE ENGINE
•
Make sure the tow vehicle parking brake is set
•
Disengage cutting Blades
•
Reduce engine to idle speed and allow engine to run momentarily for cooling
•
Turn the key to the off position
