Your SWING MIRAGE RS PLUS
Chapter 04
7
04
Your SWING MIRAGE RS PLUS
What does the SWING MIRAGE RS PLUS look like?
Fig. 1: Mirage RS PLUS
Manufacture of the SWING MIRAGE RS PLUS
Your SWING MIRAGE RS PLUS was manufactured in SWING’s production facility using the latest machines
and manufacturing techniques.
A thorough quality control is carried out after every stage in manufacture.
The quality control of course includes inspection of the materials used as well.
This allows us to all but exclude the possibility of any material defects and to trace the exact origin of all
materials used.
Development objectives
Our development team focussed on these objectives during the development and test stages for the
MIRAGE RS PLUS:
RAST technology
new canopy profile
shark-nose technology
3D-shaping
higher cell density for a stable profile with increased performance
new glider radius with shorter line length
reduced line diameter
reworked and even lighter combination of materials
completely new glider design
MIRAGE RS PLUS sizes: PRO, 8.5, 9.5, 11, 13, 15
The RAST technology developed by SWING provides noticeable stabilisation for the canopy to increase
safety for foot launching and during flight. The MIRAGE RS PLUS stands out from other gliders because of
its precise and direct handling, along with high speed and excellent glide performance. The previous model
had many features that were greatly appreciated by speed rider pilots, none of which were sacrificed here!
