1
Specifi cations subject to change without notice.
Manufactured for: Swing-N-Slide
®
• 1212 Barberry Drive • Janesville, Wisconsin 53545 •
USA
• 1-800-888-1232 • www.swing-n-slide.com
Made in USA • Printed in USA
LDR 03-08-2019 LA 5940
Olympus Wave Slide Instructions
WS 5031,
WS 5032, WS 5033
x2
x22
x11
ASSEMBLY STEPS
1. Align slide sections and the backing plates together on
the ground (
Fig. 1
). Begin attaching two slide sections
together by securing the bolts in place fi nger tight (see
Fig. 2
for proper Bolt Sequence). Following this pattern
install (1) bolt, (2) washers and (1) lock-nut per hole
(see
Fig. 1
).
Once all (11) bolts, (22) fl at washers and (11) lock-nuts
are in place go back and tighten all hardware with
appropriate tools.
IMPORTANT: Tighten securely so backing plates
and slide sections are tight against each other AND
there are a minimum of one to two threads extending
beyond each lock-nut.
Fig. 1
Fig. 2
Not Included In Kit:
Fits 60” (152,4 cm) Deck Height
FOR PRIVATE USE ONLY
DO NOT USE IN PUBLIC SETTNGS!
Weight Limit:
250 lbs
For children 2-10 years of age
Tighten nut until washers are tight against backing plates.
(11) 5/16” (7,8 mm) Lock-nut
(11) 5/16” x 1”
(7,8 mm x 19 mm)
Hex Head Bolt
(22) 5/16” (7,8 mm)
Flat Washers
Backing Plates
Backing Plates
Stake
2” x 4” x 17” (5,1 x 10,2 x 43,1 cm)
Use Pressure-Treated Wood
1-3/4”
(4,4 cm)
17” (43,1 cm)
Cut
1-3/4” (4,4 cm)
Tape Measure
Hammer
1/8” & 1/4” Drill Bits
Phillips Bit
WARNING: Assembly by adult.
AVERTISSEMENT: L’assemblage dolt être exécuté par un adulte.
ADVERTENCIA: El ensamblaje lo debe hacer un adulto.
WARNING: ASSEMBLY BY ADULT.
WARNING: ASSEMBLY BY ADULT
Circular Saw
Electric Drill
Socket Wrench set /
Wrenches
KIT INCLUDES:
x11
Hex Bolt
x2
1-1/4”
(3,2 cm)
Deck Screw
x4
1-1/4”
(3,2 cm)
1/4”
(6 mm)
1/2”
(12,7 mm)
Truss Screw
Tools Required:
Screw size should be a #8 thread size
minimum and coated for use
with treated wood.
Screw must be to sizes shown at a
minimum. Do not use a screw size
shorter than 1-1/4” (3,2 cm) long.
x1
1
5
3
6
7
9
10
11
2
4
8
