How to use the Swimnerd Personal Pace Clock
There are 5 buttons on the top of the Swimnerd Personal Pace Clock. You can click, double click,
or hold down the buttons.
Buttons
There are 5 buttons on the top of the Swimnerd Personal Pace Clock. You can click, double click,
or hold down the buttons.
From left to right, the buttons are as follows:
Power Button
: hold it down, and the clock turns on. Hold it down again, the clock turns off.
Brightness
: click it to toggle between brightness settings. When configuring the Real Time Clock
or programming a set, this button is used to toggle to the correct number.
Switch Modes
: click it to toggle between the 6 modes of the clock. If a mode is currently
running you must first Pause before you can switch modes.
Enter/Configure
: hold it down to configure the mode; click to enter and move to the next
number
Start/Pause/Reset
: click to start a mode; click to pause a mode; double click to reset
Modes
1: Count up endlessly (default)
2: Real Time Clock (24 hour)
3: Real Time Clock (12 hour)
4: Simple Set (Reps x Interval)
5: Varying Interval Set (different interval each time)
6: Stopwatch
