How to use the Swimnerd Pace Clock
Buttons
Power Button
: red button in the top left corner; click it to turn the clock on and off; it will
always default to count-up mode
Brightness
: red button in the top right corner; click it to toggle between 3 brightness settings
Switch Modes
: green button that says TIM; click it to switch between modes; you must first
pause the clock (click blue OK button to pause)
Enter/Configure/Set
: black button that says SET; click it to configure any mode
Pause:
the blue button that says OK; while in default count-up mode, click it to pause; this is
great for resyncing clocks that are slightly off
Modes
1: Count-up endlessly to 59:59 and turn over (default count-up mode)
2: Real Time Clock (MM:SS)
Summary of Contents for Pace Clock
Page 4: ......
