Swift Group Basecamp 2018, Owner'S Handbook Manual

Page: 71 / 159

ELECTRICS
69
ELECTRICS
69
3.10 Heating Controls
There are a number of heating systems that can be controlled by the EC600. The system will
be preconfigured by the manufacturer or supplying dealer. The following menu items are only
available in Timer control mode, and 3 examples are shown for the different heating system
variants.
Scroll to the Heating Settings and press select to set or adjust the following items:
WHALE
Menu Item Description
Control
Set to MANUAL to use the controls supplied by the heating
appliance manufacturer
Set to TIMER to control the appliance by the control panel with the
settings below
Set to APP control the appliance by the Swift Command app
The following menu items are only available when in Timer control mode.
WH Energy Set the energy setting to OFF, GAS, EL1, EL2, MIX1 or MIX2. See the water
heater user manual for a description of these settings.
AH Energy Set the energy setting to OFF, FAN, GAS, EL1, EL2 or EL3. See the air heater
user manual for a description of these settings.
Timer 1 Set the timer 1 event time.
This setting adjusts in 15 minute increments and
uses the 24 hour clock. Example 07:30
T1 Heating Set the timer 1 heating temperature.
This setting can be off, or 5 through to
30 degrees C. Example 22 deg C
T1 H/Water Set the timer 1 hot water temperature
This setting can be OFF or ON Example Eco
The menu now repeats for timer 2 through to timer 4
Exit
settings? When timer 4 is completed the exit settings item is reached. Press the select
button to exit and save the settings.
The timer example above will set the heating to 22 degrees C and the hot water to eco at 7:30
in the morning.
SWIFT COMMAND POWER CONTROL SYSTEM
Back to section menu