ELECTRICS
58
ELECTRICS
ELECTRICS
58
SWIFT COMMAND POWER CONTROL SYSTEM
1. Introduction
This section of the handbook will guide you
through the operation of the electrical system.
All details are correct at the time of going to
press. Please also see the online version which
will include any later updates or amendments.
Further technical details are contained in
section 3 or in the supporting technical manual
available from
For the safe operation of all electrical
equipment within your caravan it is important
that you read and fully understand these
instructions. If you are unsure of any point
please contact your dealer / distributor for
advice before use.
The system has a number of key components
that you will need to be familiar with before
attempting to use the system, these are:
· The EC601 or EC602 Power Supply Unit
(PSU) - a combined mains consumer unit and
12V controller located in the wardrobe.
• The EC620 Control Panel (CP) - a remotely
located user control panel used to turn
circuits on and off and to display battery,
water tank and other system information.
This panel uses simple straightforward
controls and reliable data communication to
the PSU.
• The PX300 Intelligent Battery charger 300W.
• The C44 Road Light Fuse Box - This small
unit is located in the front bed box. The unit
houses fuses for the road lighting circuits
and supplies from the tow vehicle, and also
has connectors for the optional alarm system
and Automatic Trailer Control (ATC) unit.
2. Using the System
2.1 Power Supply Unit - Component
Layout (see image above)
The PSU is located in the wardrobe.
2.2 Activating the System
The EC600 system has a shutdown feature
that can be used when the vehicle is in
storage. This allows the leisure electronics
to be turned off when not required to save
battery power. When in the off state the alarm
and tracking system supplies are still active, all
other supplies are turned off.
Before using the system please ensure the
system shutdown switch is in the on position
(button in) the system is now active.
Note:
if you plan to use the Swift Command
remote features the system needs to be active.
Summary of Contents for Basecamp 2018
